This daemon can accelerate or decelerate particles/bodies based on their speed. It is mostly used to simulate pressurized fluids or gases. Very high gain values should be avoided.

Min velocity

Particles with speed values lower than “Min velocity” will use the “Min gain” setting. This value is measured in metres per second [m/s].

Min gain

This is an acceleration multiplier for particles in the “Min velocity” threshold.

Max velocity

Particles with speed values over “Max velocity” will use the “Max gain” setting. This value is measured in metres per second [m/s].

Max gain

Like “Min gain”, this is also an acceleration multiplier for particles in the “Max velocity” threshold.

Clamp

If this option is set to “Yes” it normalizes the fluid’s or body’s speed to match the values set under “Max and Min speed”.

Browser not supported