Add Job

Owned by thomas (Unlicensed)
Last updated: 30 Aug, 2016
1 min read

Adding a job manually only makes sense if you have specific requirements.

We recommend adding a simulation job with the → “Send to Job Manager” button in RealFlow instead.


Most of the fields are self-explaining, and therefore only a few relevant fields are explained.

File Path

This field specifies the path to the FLW or RFS file which will be used for the current network simulation.

Path | Linux | Windows | Mac Prefix

These four fields carry → path translation rules for distributing drives and folders in your network, and making them available for RealFlow.

Delete

Old, no longer used files will be deleted after the simulation.

Hold Job

With this option you can delay the execution of the new job. To start a job a node must meet all of the following requirements:

  • At least one node must show a "ready status”.
  • If a workgroup is specified, a node must belong to the group chosen for the job.
  • All nodes must have the same “RF Version”.
  • A node’s maximum number of threads must be equal or higher than the one specified for the job.
Name

If the job contains IDOCs you have to create one job per IDOC. An IDOC's name is found in RealFlow's “Nodes” panel.

Use Cache

This option has to be active for meshing jobs.

Reset

Restores the previous settings

Submit

A click on this button passes your settings to the manager.