Here you can adjust the particles' lifespan and decide if you want to take the surface's displacement into account.
Surface offset
With the parameter's default value of 0.0, particles are created directly at the fluid's surface, but you can also define an offset between the core fluid and the splashes. This distance is measured in metres [s].
Splash min lifetime
This is the minimum lifetime of the splash particles given in seconds [s]. The lifetime parameters are a very good method of controlling the amount of splash particles. If you use different values for “Splash min lifetime” and “Splash max lifetime”, the actual lifetime will be somewhere between both settings. When a splash particle hits the core fluid it surface it will be deleted immediately, regardless of its current lifetime.
Splash max lifetime
This is the maximum lifetime of the splash particles given in seconds [s]. The lifetime parameters are a very good method of controlling the amount of splash particles. If you use different values for “Splash min lifetime” and “Splash max lifetime”, the actual lifetime will be somewhere between both settings.
Foam strength
Splash particles have the ability to contribute to foam maps and here you can control their contribution. With higher settings you will achieve a stronger effect.