This daemon can accelerate or decelerate particles/bodies based on their speed. It is mostly used to simulate pressurized fluids or gases. Very high gain values should be avoided.
Min velocity
Particles with speed values lower than “Min velocity” will use the “Min gain” setting.
Min gain
This is an acceleration multiplier for particles in the “Min velocity” threshold.
Max velocity
Particles with speed values over “Max velocity” will use the “Max gain” setting.
Max gain
Like “Min gain”, this is also an acceleration multiplier for particles in the “Max velocity” threshold.
Clamp
If this option is set to “Yes” it normalizes the fluid’s or body’s speed to match the values set under “Max and Min speed”.