...
- Download the "Job Manager" package from the → customer gateway. The bundle consists of the "Job Manager" application itself and the "Job Nodes".
- Choose, which computer should host the "Job Manager" application, and write down its IP address, for example 192.168.2.3. Start the installation.
- Install the "Job Node" application on all → licensed computers you want to use for network simulations.
Configuration
Start the "Job Manager" application and look for the following lines – all
Note |
---|
All addresses and ports, displayed here, are examples and have to be replaced through your actual settings. |
Start the "Job Manager" application and look for the following lines:
Waiting for RealFlow instances: Binding to port: 65454
HTTP Petitions. Binding to port: 8080
...
- Select Simulation Plugin. Choose "CmdSendJob".
- Select Preview Plugin. Chose "CmdSendPreviewJob".
Manager Location. Enter the IP address of the computer with the "Job Manager" applicationapplicatiom, for example192.168.2.3
. - Port. Enter
65454
(example only, use the actual port from your system!) Default URL. Enter the IP address of the computer with the "Job Manager" followed by
:8080
, for example192.168.2.3:8080
To check if everything is configured correctly, open Layout > Job Manager. A web interface appears. Alternatively you can use any web browser and enter the Job Manager's, for example 192.168.2.3:8080
.
Path Translation Rules (PTR)
...