Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

You can use any object with this emitter to fill it or create particles on its surface. Changes on position, rotation, or scale do not affect this emitter, because the creation of particles depends on the object you want to fill with particles. Objects meant to be filled require a → Volume" tag, but it can be used to refine the particle cloud. For more information on filling objects please go to → "Filling Objects 1" (volume particle filling) and → "Filling Objects 2" (surface particle layer).

 

 

RealFlow Scene

In RealFlow | Cinema 4D it is possible to use multiple "Scene" trees in the same project:

  • To link the emitter to a different scene tree dragging the appropriate "Scene" node to this field 
  • Furthermore you have direct access to the selected "Scene" tree's → "Solver", → "Cache", and → "Display" tabs. For descriptions of these parameters follow the links.

To link the emitter to a "Fluid" drag the appropriate "Fluid" node(s) to this field.

To learn more about how to link RealFlow scene elements and make them interact take a look at the → "Links" page with examples.

Emitter Type

Toggle the emitter type with this drop-down menu. The following parameters and the viewport representation will be updated according to your selection. Bear in mind that type changes will change the emitter's and fluid's behaviour completely.

Body

You can drag any closed object to this slot to fill it with particles, but only one node per emitter is allowed.

Particle Distribution

This parameter offers two entries:

  • "Fill Volume" is used to fill an object's inner space with particles. This is the default choice and offers "Fill Volume" parameter set.
  • "Particle Layer" evenly covers an object's surface with particles. This option provides the "Particle Layer" parameter set.

Fill Volume Parameters

Jittering

By default, the emitter creates a regular particle distribution and this leads to patterns. “Jittering” adds random displacement to the particles. The allowed values range between 0.0 and 1.0 for maximum randomness.

Seed

In order to change the initial distribution of particles in conjunction with "Jittering" change this value. You can enter any positive number.

Fill Ratio X

This parameter is used to achieve partial filling. A value of 0.0 means that there are no particles in X direction, while 1.0 entirely uses the selected axis.

Fill Ratio Y

This parameter is used to achieve partial filling. A value of 0.0 means that there are no particles in Y direction, while 1.0 entirely uses the selected axis.

Fill Ratio Z

This parameter is used to achieve partial filling. A value of 0.0 means that there are no particles in Z direction, while 1.0 entirely uses the selected axis.

Fill mode

The effect of this option is based on an object's → "Volume Mode" settings. For more information on filling objects go to → "Filling Objects":

  • With "Fill solid region" an object's inner area will be filled. 
  • "Fill non solid region" adds particles outside the volume.
Layers to remove

With this function it is possible to delete particle layers from the outside to the inside. This creates a gap between the object and the fluid.

Fill Volume

Activate this feature to fill the object with particles. Here are a few notes:

  • As soon as a force is acting on the particles, e.g. “Gravity” the particles will start to collapse. This means that the original volume will not be maintained.
  • You have to simulate for a certain time to let the fluid particles settle. Then, an → initial state can be created and the simulation is resumed from this state.
Layer

With “Fill volume” disabled the particles are spread over the object's surface. This feature does not create a particle stream. When the emitter's associated object carries a texture (see “Texture”) the particles will only be created in areas with texture values greater then 0.

Texture

With “Layer” turned on and a texture it is possible to create particles in certain areas on the object's surface:

  • Particles are only created in areas with texture values (“Color”) greater than 0
  • Texture tags and projection methods are not evaluated – the emitter uses UVWs only.
  • Cinema 4D's built-in procedural shaders (e.g. noise) are supported.
  • Please read → "Image and Object Emitters" for detailed information.

Particle Layer Parameters

 

Body

Drag the object you want to cover with particles to this field. The number of particles can be controlled with the associated fluid container's → "Resolution" parameter.

Texture

If you want to control the particle layer through a bitmap or a shader

  • create a standard material and add a bitmap or shader, e.g. to the "Color" channel
  • drag the texture channel's thumbnail to this field
  • reset the scene: go to the last frame and then back to frame 0.
  • No labels