System requirements
Windows
- Windows 7 SP1, Windows 8, or Windows 8.1
- CPU 64-bit Intel® or AMD® multi-core processor
- 4 GB RAM minimum, 8 GB of RAM memory is highly recommended
- Hardware-accelerated OpenGL® graphics card
- 1 GB available hard disk space for installation
- 3 button mouse
Linux 64
- 64 bits distribution with a 2.6 Kernel and glib 2.11.3
- csh (C-shell)
- CPU 64-bit Intel® or AMD® multi-core processor
- 4 GB RAM minimum, 8 GB of RAM memory is highly recommended
- Hardware-accelerated OpenGL® graphics card
- 1 GB available hard disk space for installation
- 3 button mouse
Macintosh
- Mac OS X 10.8 and higher
- CPU 64-bit Intel®
- 4 GB RAM minimum, 8 GB of RAM memory is highly recommended
- Hardware-accelerated OpenGL® graphics card
- 1 GB available hard disk space for installation
- 3 button mouse
Improvements
Graphs
RF-1659 Improvement - Nodes that read from file should output the last position read of the file as well.
Maxwell Integration
RF-2527 Improvement - Access to Maxwell sun rotation from Python, Graphs and XML.
Limitations
Caronte
RF-514 Limitation - Interaction with planes is not good
Caronte integration
RF-1568 Limitation - A node of type HY_Domain in cache mode doesn't affect neither rigid nor soft body objects.
Commands
RF-1330 Limitation - Commands organizer should accept graphs
FLW read/write
RF-2170 Limitation - The option "Selection Highligthing" from the menu "View->Show" is not saved with the project.
RF-2169 Limitation - The options to hide/show the nodes of the scene from the menu "View->Show" are not saved with the project.
General
RF-160 Limitation - Scene Animation.SD doesn't hold new objects created during the simulation.
RF-158 Limitation - FLW files are not interchangeable between machines with different endianness.
RF-157 Limitation - BDC files are not interchangeable between machines with different endianness.
RF-156 Limitation - Maximum number of threads is 128
Graphs
RF-1988 Limitation - FieldSave node cannot save several fields inside a single file. Unlike FieldRealLoad.
Grid splash & Foam
RF-562 Limitation - Mist can't be created for Splash&Foam and Wet&Foam nodes.
Grid wet & Foam
RF-562 Limitation - Mist can't be created for Splash&Foam and Wet&Foam nodes.
Hybrido
RF-1568 Limitation - A node of type HY_Domain in cache mode doesn't affect neither rigid nor soft body objects.
Hybrido fluids
RF-300 Limitation - Proxy files cannot be exported with the GridDomain on cache mode
Hybrido mesh integration
RF-2378 Limitation - Liquid-Hybrido secondary emitters and Liquid-Particles emitters are ignored for meshing when added to a HY_Mesh.
Maxwell Integration
RF-1735 Limitation - RealFlow crashes during Maxwell voxelization when memory is exceeded
Object emitter
RF-146 Limitation - Object Emitter in vertex or faces mode does not export the selection
User interface
RF-2170 Limitation - The option "Selection Highlighting" from the menu "View->Show" is not saved with the project.
RF-2169 Limitation - The options to hide/show the nodes of the scene from the menu "View->Show" are not saved with the project.
XML import/export
RF-333 Limitation - Initial State for objects cannot be reused when exporting scene as XML because it is embedded into the .FLW file.
RF-146 Limitation - Object Emitter in vertex or faces mode does not export the selection
Fixed bugs
Alembic
RF-2776 Major - UV's are not correctly stored.
RF-2769 Major - Stitcher relies on correct padding to sort files -
RF-2768 Major - Store velocity in all polymeshes as builtin (not only as arb geom) -
RF-2754 Bug - Different animations with the same alembic node makes stitcher crash
RF-2783 Bug - The "Geometry scale" global parameter is not applied correctly when loading cache alembic particle files for "Liquid-Particles" emitters.
RF-2780 Bug - Objects loaded from alembic files don't have valid texture coordinates even thought the textures are shown correctly on the OpenGL viewport. As a result things like, for instance, the Object emitter doesn't work when emitting from a texture.
RF-2749 Bug - Objects imported from Alembic are not updated properly during animation when the global "Geometry Scale" parameter is different than 1. This happens for both regular objects and objects imported as a Multibody.
Alembic I/O
RF-2753 Bug - RF crashes when displaying a stitched particle mesh and loading an undefined frame
Attractor daemon
RF-2556 Bug - Attractor daemon does not work with secondary emitters of Liquid-Hybrido type.
RF-2558 Bug - The "Affect" parameter in the Attractor daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
Built-in objects
RF-2542 Bug - Cell size scale is not applied to new scene objects unless scene is reopened, or cell size scale is changed again.
C++ SDK
RF-2731 Bug - It is not possible to link a Group with a Hub with scripting or graphs.
RF-2732 Bug - Removing nodes from a graph or Python may crash RealFlow if there are groups in the scene.
Command Line Version
RF-2550 Bug - RealFlow crashes when launching Hybrido simulations with Initial State.
Coriolis daemon
RF-2561 Bug - Coriolis daemon does not work with secondary emitters of Liquid-Hybrido type.
RF-2562 Bug - The "Affect" parameter in the Coriolis daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
Drag force daemon
RF-2544 Bug - Drag daemon does not work with secondary emitters of Liquid-Hybrido type.
DSpline daemon
RF-2567 Bug - The "Affect" parameter in the DSpline daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2565 Bug - DSpline daemon does not work with secondary emitters of Liquid-Hybrido type.
Ellipsoid force daemon
RF-2563 Bug - Ellipsoid Force daemon does not work with secondary emitters of Liquid-Hybrido type.
Fractures
RF-2553 Bug - RealFlow crashes when we try to fracture any type of Mesh node.
General
RF-2551 Bug - Build Mesh Sequence should make sure that selected meshes have the Build parameter set to Yes.
Graphs
RF-2722 Bug - Compound Interface graph nodes are not properly painted when they have no pins.
RF-2535 Bug - RealFlow crashes on simulation when a second scene is loaded and uses a graph global variable with the same value as another one.
RF-2731 Bug - It is not possible to link a Group with a Hub with scripting or graphs.
RF-2732 Bug - Removing nodes from a graph or Python may crash RealFlow if there are groups in the scene.
RF-2721 Bug - ParticleAddChannel graph node allows empty and wrong channel names.
RF-2543 Bug - NumMapRange graph node should show warnings or errors when some of its inputs is missing.
RF-2646 Bug - QuaternionFromComponents node does not return as many values as the size of its biggest input array.
RF-2560 Bug - Matrix4FromComponents does not return as many matrices as the size of its biggest input array.
RF-2536 Bug - Graph notes appear duplicated after undo/redo operations. Reopening the graph removes the issue.
RF-2546 Bug - "bytes written" output pin from StringReadFromFilePath graph node should be called "bytes read".
RF-2564 Bug - SetNodeParameter graph node does not work with parameters of Double type. Like SPH emitters "Resolution".
Gravity daemon
RF-2585 Bug - The "Affect" parameter in the Gravity daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
Grid splash
RF-2559 Bug - The initial state of the Hybrido secondary emitters is not found unless the BIN format is used in the export central. It should be the RPC format.
RF-2555 Bug - Angle threshold in Hybrido Splash emitters isn´t copied when cloning.
Grid splash & Foam
RF-2559 Bug - The initial state of the Hybrido secondary emitters is not found unless the BIN format is used in the export central. It should be the RPC format.
Grid Waterline
RF-2791 Bug - The particles from the "HY_Waterline" node are placed wrongly when the fluid used to place them is missing.
RF-2790 Bug - The particles from the "HY_Waterline" node don't have a valid value for the "radius" channel. It is always 0.
RF-2772 Bug - RealFlow crashes when the "Object" referenced by a "HY_Waterline" is missing when the scene is loaded.
Grid Wet
RF-2773 Bug - RealFlow crashes when the "Object" referenced by a "HY_wet" is missing when the scene is loaded.
Grid wet & Foam
RF-2774 Bug - RealFlow crashes when the "Object" referenced by a "HY_Wet_Foam" is missing when the scene is loaded.
Hybrido
RF-2695 Bug - The timing of Hybrido simulations is different if the general max. steps is larger than the hybrido min. steps.
RF-2662 Bug - RealFlow crashes If we start a simulation after a reset to initial state where the initial state for the HY_Domain was created using F3D.
RF-2660 Bug - RealFlow crashes when we try to create an initial state for a HY_Domain node and the F3D file format is checked in the export central.
RF-2661 Bug - RealFlow crashes If we start a simulation after a reset to initial state where the initial state for the HY_Domain was created using VDB.
RF-2659 Bug - RealFlow crashes when we try to create an initial state for a HY_Domain node and the VDB file format is checked in the export central.
RF-2586 Bug - The "Affect" parameter in the Gravity daemon does not work with Hybrido domains when the value is set to "Velocity".
RF-2555 Bug - Angle threshold in Hybrido Splash emitters isn´t copied when cloning.
RF-2550 Bug - RealFlow crashes when launching Hybrido simulations with Initial State.
Hybrido fluids
RF-2727 Bug - RealFlow crashes If we reset to an initial state created using the VDB format when the simulation was done exporting the GFC format.
Hybrido mesh integration
RF-2792 Bug - RealFlow crashes when meshing a "HY_Mesh" node and the vorticity option in the Alembic file format options is enabled. Only if previously we have loaded a cached frame for the same "HY_Mesh" node.
Import objects
RF-2542 Bug - Cell size scale is not applied to new scene objects unless scene is reopened, or cell size scale is changed again.
Layered vortex daemon
RF-2570 Bug - The "Affect" parameter in the Layered Vortex daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2569 Bug - Layered Vortex daemon does not work with secondary emitters of Liquid-Hybrido type.
Limbo daemon
RF-2568 Bug - The "Affect" parameter in the Limbo daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2566 Bug - Limbo daemon does not work with secondary emitters of Liquid-Hybrido type.
Magic daemon
RF-2572 Bug - The "Affect" parameter in the Magic daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2571 Bug - Magic daemon does not work with secondary emitters of Liquid-Hybrido type.
Maxwell Integration
RF-2766 Bug - HDR Background should not be checked (only illumination) when starting rendering
RF-2786 Bug - Disable protection for MXS files
RF-2696 Bug - RealWave tiling with Maxwell Fire shows up rotated when the RW patch is non square
RF-2739 Bug - Maxwell commandline render images are not scaled up again (using the quality %)
RF-2724 Bug - max resolution of cameras is 2560x2048
Multibody
RF-2749 Bug - Objects imported from Alembic are not updated properly during animation when the global "Geometry Scale" parameter is different than 1. This happens for both regular objects and objects imported as a Multibody.
Noise field daemon
RF-2574 Bug - The "Affect" parameter in the Noise daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2573 Bug - Noise Field daemon does not work with secondary emitters of Liquid-Hybrido type.
Object emitter
RF-2780 Bug - Objects loaded from alembic files don't have valid texture coordinates even thought the textures are shown correctly on the OpenGL viewport. As a result things like, for instance, the Object emitter doesn't work when emitting from a texture.
RF-2778 Bug - RealFlow crashes when the texture file loaded for the "Speed" parameter in the Object Emitter node is missing and we simulate.
Object field daemon
RF-2576 Bug - The "Affect" parameter in the Object Field daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2575 Bug - Object Field daemon does not work with secondary emitters of Liquid-Hybrido type.
Objects
RF-2749 Bug - Objects imported from Alembic are not updated properly during animation when the global "Geometry Scale" parameter is different than 1. This happens for both regular objects and objects imported as a Multibody.
RF-2738 Bug - When loading a scene the global cell size scale is not applied to the computation of the volume of regular objects, i.e. objects not coming from a multibody node.
Ocean Force daemon
RF-2578 Bug - The "Affect" parameter in the Ocean Force daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2577 Bug - Ocean Force daemon does not work with secondary emitters of Liquid-Hybrido type.
OpengGL general visualization
RF-2756 Bug - RealFlow crashes when all the SceneView panels are closed and we try to add an object to the scene.
Python API
RF-2793 Bug - It is not possible to create, get or modify particle attributes of type PARTICLE_CHANNEL_TYPE_VECTOR_FLOAT with Python.
RF-2761 Bug - scene.removeNode() function is missing from Python API.
Python SDK
RF-2690 Bug - There is an urceValues() command in Python which is not correct.
RF-2731 Bug - It is not possible to link a Group with a Hub with scripting or graphs.
RF-2732 Bug - Removing nodes from a graph or Python may crash RealFlow if there are groups in the scene.
Relationship Editor
RF-2704 Bug - It is not possible to remove more than one Group at the same time from the Relationship Editor.
SD read/write
RF-2789 Bug - When a simulation is stopped between frames (at a sub-step) the objects imported from a SD file and still linked to the SD file are located wrongly if we scrub the time line. Reset doesn't seems to fix the problem.
RF-2698 Bug - Updating a SD where there are objects in a group, will create duplicated Ids when opening the scene again.
Shelves
RF-2669 Bug - Shelves elements get screwed when elements are popped-up
Shelves Manager
RF-2669 Bug - Shelves elements get screwed when elements are popped-up
Simulation Flow window
RF-2531 Bug - When simulation stops, Simulation Flow script editor text cursor is moved to the beginning of the script.
Texture-based parameters
RF-2784 Bug - The last folder used to load textures is not remembered, so the same default folder is always used.
Tractor daemon
RF-2580 Bug - The "Affect" parameter in the Tractor daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2579 Bug - Tractor daemon does not work with secondary emitters of Liquid-Hybrido type.
Vortex daemon
RF-2582 Bug - The "Affect" parameter in the Vortex daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2581 Bug - Vortex daemon does not work with secondary emitters of Liquid-Hybrido type.
Wind daemon
RF-2584 Bug - The "Affect" parameter in the Wind daemon does not work with Hybrido secondary emitters when the value is set to "Velocity".
RF-2583 Bug - Wind daemon does not work with secondary emitters of Liquid-Hybrido type.
Known bugs
3D platform plug-ins
RF-2431 Bug - Preview with Maxwell by command line is not rendering the obj files.
Alembic
RF-1886 Bug - ParticleLoad graph node does not load properly Alembic files that come from a standard emitter simulation.
RF-1749 Bug - "Degenerated faces" message appears with an alembic file
RF-1694 Bug - "Normal facing" value is not applied for an imported animation objects in Alembic format.
RF-1515 Bug - The light is changing for the Alembic object in the viewport when moving the timeline
RF-1177 Bug - UNDO is not working for alembic properly
RF-1175 Bug - Same object, imported as Alembic and SD, won't match their animation.
RF-1174 Bug - Alembic objects is changing the light when moving the timeline.
RF-1154 Bug - Parent to is not working with Alembic to scale globally from a Null
RF-1153 Bug - Alembic is not working properly when rotating in RealFlow and moving the timeline.
RF-1031 Bug - Alembic files are not imported in Maya
Alembic I/O
RF-1540 Bug - Once an alembic file has been loaded, its "file handle" is not freed.
RF-1538 Bug - Normals exported from RF in alembic are not correct
RF-1424 Bug - Moving a cloned multibody coming from an alembic file does not work properly
Alternative paths
RF-2481 Bug - Creating a new scene does not clear the current state of alternative paths.
Animation curves
RF-2234 Bug - There is a gap between animated geometry and distance field if the geometry is animated in RealFlow.
RF-969 Bug - We can add keys for an imported SD even though the SD<>Curve is not enabled.
RF-455 Bug - Realflow doesn't work with negatives frames properly.
Arnold Integration
RF-2452 Bug - Sometimes the "maxwell" and "arnold" file names on Export Central are missing.
RF-2375 Bug - particle meshes don't have correct uv's
Batch script
RF-1688 Bug - Clicking on the right column of the script editor autocompletion popup does not open the help for that function.
Binary loader emitter
RF-866 Bug - Retimer should work with unsimulated binary loaders.
Built-in objects
RF-1905 Bug - Capsule object is not symmetrical
C++ SDK
RF-1574 Bug - The maxwell related SDK functions that are now available in Python are not available in C++.
RF-1141 Bug - Removing a standard emitter node during simulation (via scripting or graph) crashes RealFlow.
Camera
RF-1758 Bug - Modifying a camera view with the viewport should be undoable.
RF-1757 Bug - Modifying a camera view directly on the viewport does not set the scene as modified.
Caronte
RF-1159 Bug - Changing the normals to reversed for dynamics objects is working bad when selecting active or passive
RF-1061 Bug - Unlimited Force for joints doesn't mean unlimited force. Name should be changed.
RF-1060 Bug - Changing the values for Elasticity and Friction to 1.0 produces a slow simulation, but faster if we stop the simulation and resimulate.
RF-1058 Bug - Softbodies are exploding when the Plasticity adquired is 1. Simulation Quality for this scene is 70.
RF-996 Bug - Simulating by command line, the break condition is not working properly.
RF-995 Bug - Fracturing an object by geometry is generating an empty multibody. (see the scene attached)
RF-993 Bug - Characteristic distance is not properly updated when simulating by command line.
RF-984 Bug - Apply force factor fracture is not working properly cause the object is fully broken when simulating.
RF-977 Bug - Simulating by command line don't set the values for the Characteristic Distance properly.
RF-950 Bug - joints plasticity acquired rate param no used
RF-859 Bug - Editing target of servo after some simulation makes Reaction time and Overreaction delta values to fail
RF-858 Bug - All parameters of servos need recreation of servo after edition
RF-853 Bug - Imported animated objects to use them as softbodies, can't be set with an initial speed.
Caronte integration
RF-1112 Bug - Fracture tool voronoi uniform is using "extrussion effect" unexpectedly.
RF-954 Bug - Joints behaviour is lost when loading a simulation. Also, loading the simulation is too slow.
RF-953 Bug - Pannel values of axial vectors (like angular velocity) are wrongly interpreted when using right-handed axes systems.
RF-833 Bug - Dynamics objects, if they are cached, should be read the BDC information before re-writing the BDC file again
RF-638 Bug - Remove object from the Objects A, B or C lists of servos and joints when it stops being of the appropriated type
RF-377 Bug - Changes on scale scene with rigids have issues if not done on reset
RF-364 Bug - Conflict on 'Create Initial State' among .bdc and animation.sd
RF-359 Bug - Caronte simulations aren´t deterministic unless RF gets reopen every time
Circle emitter
RF-913 Bug - V and H random is not working if an emitter is set as volume
Command Line Version
RF-1428 Bug - Fill Object not working on command line
RF-1332 Bug - RealFlow is crashing when creating a folder and it can't be created.
Commands
RF-2435 Bug - Command line options should be exported in the xml
RF-445 Bug - RF crashes at shutdown when the file for a command plugin is removed from the plugins folder and that command plugin was previously loaded into RF using the commands organizer, only happen when a scene is loaded before closing.
Curve Editor
RF-847 Bug - Expressions with references are not updated when the related parameter changes and is not animated.
Drag force daemon
RF-1984 Bug - Force Limit parameter for Drag Daemon is not working
DSpline daemon
RF-1422 Bug - XML export and import of animated DSpline and Spline Emitter control points is not possible.
Export Central
RF-2452 Bug - Sometimes the "maxwell" and "arnold" file names on Export Central are missing.
RF-1525 Bug - Disabling RFS from Export Central sends the FLW to the Job Manager instead of a script. There should be no checkbox.
Fibers emitter
RF-919 Bug - Fibers emitter should have a seed # to be deterministic.
File export
RF-2231 Bug - Animation.sd and bdc for imported geometry as Multibody or ABC multibody are not saved by command line.
RF-1791 Bug - Hybrido Domain does not recognize the $(IDOC) macro for exporting/importing data.
RF-1503 Bug - .obj export of capsule -> normals are all 0 or -nan (not a number)
RF-1070 Bug - RealFlow crashes in command line when there is no HDD space
Fill object emitter
RF-1428 Bug - Fill Object not working on command line
Fractures
RF-1189 Bug - Fracture by points is not working properly.
RF-1188 Bug - Fracture tool radial is not working properly.
RF-1047 Bug - The twist parameter should accept negative values [-1, 1]. Now it is only accepting positive values. Fractures by radial
RF-1046 Bug - External transition decay should be Internal transition decay for the Internal group inside fracture by radial parameters.
General
RF-2013 Bug - File Name Prefix, from File Name Options is missing from graphs.
RF-1711 Bug - RF cannot be executed when installed in a folder with blanks
RF-1308 Bug - Command line simulation doesn't print an error when an object is missing
RF-1079 Bug - Email notification hangs RealFlow selected when running on GUI
RF-852 Bug - A daemon can be parent to with a RigidBody but not with a SoftBody.
RF-485 Bug - Objects with an Initial State created are reseted to initial state even they are Inactive
RF-474 Bug - BDC files are overwriting when simulating with the objects in cache mode
RF-460 Bug - Minimized windows don't update when the same viewport is reopened.
RF-458 Bug - Object name must be removed from Multjoints if the object is changed to dynamics NO.
Graphs
RF-2512 Bug - The attached VDB file can't be meshed with the graph node "FieldRealMesher" anymore.
RF-2443 Bug - Pressing the run graph shortcut keys (CTRL+ENTER) during parameter edition may crash RealFlow on Mac OS X.
RF-2158 Bug - Simulation Flow Graphs should save the viewport geometry.
RF-1987 Bug - Field3D files generated during a Hybrido Domain simulation cannot be loaded with a FieldRealLoad graph node.
RF-1886 Bug - ParticleLoad graph node does not load properly Alembic files that come from a standard emitter simulation.
RF-1885 Bug - RealFlow crashes when the graph node "MeshDisplaceFromImage" is using an "uv" map where one of the components is 1.
RF-1772 Bug - Insert Pass through and CTRL + Z is crashing RealFlow.
RF-1760 Bug - MeshClip nodes seem to corrupt the mesh UV values.
RF-1747 Bug - Clicking on Evaluate Node or Evaluate Pin instead of running a graph does not work properly if there are GetParticles nodes.
RF-1689 Bug - SetNodeParameter graph node should refresh the parameter list.
RF-1687 Bug - SetImageChannel node doesn't seem to work properly if the 'image channel' source has more than 1 channel.
RF-1670 Bug - Graphs Messages window does not show messages belonging to child compounds.
RF-1665 Bug - Most arithmetic operations with data of Color4 type return unexpected values for the alpha component.
RF-1661 Bug - Floor and Ceil math nodes should allow the passthrough of their inputs.
RF-1656 Bug - Numeric pins with passthroughs don't clean properly their old stored data.
RF-1647 Bug - Graphs including the ConditionIf node might lead to an infinite loop when connecting something to it.
RF-1622 Bug - Ocean Statistical Spectrum "Vertical scale" out of sync
RF-1621 Bug - Ocean Statistical Spectrum "Time scale" out of sync
RF-1579 Bug - Graph nodes that write to file should have some control over the buffersize.
RF-1245 Bug - Graph Notes alpha is reset to strange values when changing background colors
Grid Foam
RF-1740 Bug - Foam particles are behaving wrongly in some circumstances, it seems to be when the core fluid simulation is very thin.
Grid splash
RF-2285 Bug - Max particles for secondary splash emitter is not working
RF-2184 Bug - RealFlow crash when orbiting the viewport while using Splash-Hybrido
Grid splash & Foam
RF-1121 Bug - The exported sequence is not divided into two sequences, one for "_splash", "_wet" and the other "_foam."
Grid wet & Foam
RF-1121 Bug - The exported sequence is not divided into two sequences, one for "_splash", "_wet" and the other "_foam."
Hybrido
RF-1762 Bug - The parameter "Evaluation uvw mapping" in the "Ocean Statistical Spectrum" panel for the "HY_Domain" nodes is deprecated and should not be part of the panel anymore.
RF-1622 Bug - Ocean Statistical Spectrum "Vertical scale" out of sync
RF-1621 Bug - Ocean Statistical Spectrum "Time scale" out of sync
RF-1325 Bug - Bounded is not working for foam when generating by domain
RF-1322 Bug - Use cache for Displacement will make crash RealFlow
Hybrido fluids
RF-1373 Bug - Friction texture in the HyFLIP solver is not working when the volume mode of the object is "Shell".
Hybrido mesh algorithm
RF-1869 Bug - RealFlow crash when building the mesh in this scene with clipping objects (scene link attached)
RF-1655 Bug - Splash attenuation creates noise patterns
RF-1404 Bug - The attenuation of the displacement based on the splashity is not working well.
Hybrido mesh intergration
RF-2173 Bug - Hybrido meshes are not exported properly to ABC when using use displacement
RF-1573 Bug - Use of Hybrido Mesh with SPH emitters doesn´t work if the SPH emitters are in Cache mode and the -mesh flag is used
RF-1507 Bug - HY_Mesh node lacks a texture channel
IDOC
RF-1791 Bug - Hybrido Domain does not recognize the $(IDOC) macro for exporting/importing data.
Import objects
RF-1346 Bug - OBJ import uses LW axis setup
RF-1345 Bug - OBJ import doesn´t rename objects imported more than once
RF-309 Bug - Flat planes imported as .SD from a 3D application have collision distance equal to zero
Job Manager
RF-1525 Bug - Disabling RFS from Export Central sends the FLW to the Job Manager instead of a script. There should be no checkbox.
K age daemon
RF-918 Bug - k Age daemon should accept float values for better precision.
K sphere daemon
RF-1909 Bug - Fit to Object doesn't allow to choose emitters as objects for some K daemons
K volume daemon
RF-1909 Bug - Fit to Object doesn't allow to choose emitters as objects for some K daemons
Maxwell Integration
RF-2456 Bug - motion blur not working on command line
RF-2452 Bug - Sometimes the "maxwell" and "arnold" file names on Export Central are missing.
RF-1998 Bug - use default material if path is invalid (coming from windows i.e.)
RF-1794 Bug - Maxwell window has nothing inside at the time of its creation.
RF-1789 Bug - Weird slow start of rendering
RF-1535 Bug - FIRE is slower with 20% quality than with 100%
RF-1095 Bug - Maxwell is not picking up the meshes that are displayed using the "DisplayMesh" simulation graph nodes.
RF-1019 Bug - Maxwell takes long time to update the view when there is just one viewport working on Windows.
Movie Player window
RF-2210 Bug - Movie Player crashes exporting video if some of the frames has a different size.
RF-2183 Bug - RealFlow is crashing if we cancel "save video" in the movie player.
RF-1722 Bug - Movie Player won't open files with padding lower than the number of frames.
RF-1089 Bug - RealFlow is crashing when cancelling to create a video from movie player.
Multibody
RF-1996 Bug - Updating a SD loaded as multibody hangs the machine
RF-524 Bug - SD scene update does not seem to work with Multibodies
Multijoint
RF-2398 Bug - Adding Multibodies to Multijoints and checking the Disable collisions by pairs parameter makes that the objects are dessapearing of the objects list.
RF-625 Bug - Create/Recreate button removes joints for all MJ nodes, to create the new joints for the actual Multijoint node.
MultiServos
RF-895 Bug - Name of some parameters in servos panel must be changed.
RF-679 Bug - Multiservo linear doesn't work properly with the Free Z parameter to Yes.
Node parameters window
RF-1689 Bug - SetNodeParameter graph node should refresh the parameter list.
Object manipulation in viewport
RF-2286 Bug - Particles as Spheres are represented in a wrong way in an orthographic view.
OpengGL general visualization
RF-2457 Bug - Exported OpenGL viewport images during simulation are might show a frame offset.
RF-1666 Bug - OS X viewport font looks misaligned.
RF-1624 Bug - OpenGl camera problem
RF-1403 Bug - OpenGL images generated during playback (or simulation) are sometimes unsynchronized.
RF-1310 Bug - VBO active in ATI graphic cards changes the viewport background color
OpengGL glsl shaders
RF-1552 Bug - Spheres drawn with the shader (in hybrido obv) are deformed based on the window size.
Parameters manipulation
RF-1712 Bug - Whitespaces on node names can mess up with a lot of node parameters which relay on the blank space as the separator for multiple values.
Particle mesh (Renderkit) integration
RF-709 Bug - RK Mesher Clipping not working with RealWave nor Box
Particle mesh (Standard)
RF-876 Bug - UV in md meshes is not working properly
Particle-based fluids
RF-680 Bug - Max particles in Splash emitter doesn´t have any effect
RF-280 Bug - "Thin face test" is not working.
Preferences
RF-2432 Bug - RealFlow does not write preferences properly under OS X 10.10 (Yosemite)
Python API
RF-2021 Bug - activeExportData and isExportDataActive functions are missing for some node types like waterline
RF-842 Bug - Object "getVelocity" function is giving wrong results.
Python Editing
RF-2305 Bug - Python Find dialog remains behind the script editor when it is modal.
RF-2304 Bug - Dragging a piece of Python code from a Script Editor to a shelf removes the code from the editor. It can be brought back with CTRL+Z
Python SDK
RF-2236 Bug - Calling scene.exportCurrentFrame() during simulation freezes RealFlow.
RF-1141 Bug - Removing a standard emitter node during simulation (via scripting or graph) crashes RealFlow.
RF-874 Bug - scene.stopSimulation() doesn't work if simulation is started from a Batch Script
RealWave
RF-1769 Bug - Realwave interaction with objects is wrong when chopinness is activated
RF-1622 Bug - Ocean Statistical Spectrum "Vertical scale" out of sync
RF-1621 Bug - Ocean Statistical Spectrum "Time scale" out of sync
RF-1443 Bug - Connecting from Object Splash to RealWave will make crash RealFlow.
RF-1344 Bug - RealWave custom wave collision testing is wrong.
RF-1080 Bug - Imported objects as Realwave "Custom", are not affected by other objects if the position and rotation for the RealWave is different to 0,0,0
RF-1016 Bug - RealWave Displacement texture dimensions parameter
RF-925 Bug - Objects are not affecting to the RW as custom object if the sd has orientation's transformation.
RF-855 Bug - Kvolume kills all particles for the realwave with the particle layer activated.
RF-452 Bug - RealWave waterline of objects is not correctly computed with choppy Statistical Spectrum waves.
RealWave Object splash
RF-1443 Bug - Connecting from Object Splash to RealWave will make crash RealFlow.
Relationship Editor
RF-2255 Bug - Relationship Editor groups self-connection threshold is too sensitive.
RF-2254 Bug - Relationship Editor group self connection cannot be selected and displays artifacts.
RF-2168 Bug - Multjoints shouldn't be linked with no nodes in the RelationShip Editor
RF-2159 Bug - Relationship Editor should save the viewport geometry.
RF-1077 Bug - Nested groups are not displayed properly in Relationship Editor.
RF-1076 Bug - When uncollapsing a Group in the Relationship Editor, the text label of its members appears in a wrong place, especially the first time.
RF-1056 Bug - A vertical black line appears over the top left corner of a group when expanded.
RF-1055 Bug - Artifacts are displayed around groups when moving them around the Relationship Editor.
RF-991 Bug - Hidding a group in the Relationship Editor and unhidding again, it will unhide the nodes inside the group too.
Retimer
RF-1211 Bug - Sometimes RealFlow crashes when clicking on the Input/Output section of the retimer if the scene animation.sd file export is enabled on Export Central.
RF-866 Bug - Retimer should work with unsimulated binary loaders.
RF-838 Bug - When only the scene animation.sd is being exported, the default settings of the retimer exclude them of the result.
SD read/write
RF-1888 Bug - Animation coming from a SD file and exported using Cinema4D is wrong.
RF-1868 Bug - RealFlow is not able to update the sd if we lost the network conection.
RF-1119 Bug - Multibodies doesn't update with Update SD option.
RF-1020 Bug - Polygons are bad displayed on geometry but not in Maxwell (see images and video attached)
RF-994 Bug - Exporting SD or animation.SD for an object, is overwritten even though it is in Cache mode.
RF-989 Bug - Animation SD and BDC are not read properly when a dynamic object is in Cache mode.
RF-959 Bug - Changing the topology for a SD from a 3D program and doing reset, the object dissapear in RealFlow.
RF-720 Bug - Including an object to collision with sph particles in the middle of the simulation changes its original position. There is not any Dynamic object.
Shelves
RF-2304 Bug - Dragging a piece of Python code from a Script Editor to a shelf removes the code from the editor. It can be brought back with CTRL+Z
Shelves Manager
RF-2022 Bug - Up and down keyboard arrows do not let you move along the content of the shelves/commands list in the Shelves Manager. (Mac OS X)
Simulation Flow architecture
RF-899 Bug - Particles created at the same frame (or last substep) cannot be removed from "Simulation Flow".
Simulation Flow window
RF-2158 Bug - Simulation Flow Graphs should save the viewport geometry.
RF-2034 Bug - Script files on Simulation Flow don't show any error when the file is missing.
Simulation Graph
RF-1145 Bug - Exploding a Compound might put the nodes inside mixed with the existing ones at the current level. At least those nodes should remain selected for their repositioning.
RF-1141 Bug - Removing a standard emitter node during simulation (via scripting or graph) crashes RealFlow.
Spline emitter
RF-1721 Bug - @CP rotation for DSSpline emitter is working bad when simulating.
RF-1422 Bug - XML export and import of animated DSpline and Spline Emitter control points is not possible.
User interface
RF-2237 Bug - Display Slice Plane for geometries is painting geometry subdivisions.
RF-2035 Bug - Particles as spheres are painted in different sizes when displaying in perspective and front, side views.
RF-1332 Bug - RealFlow is crashing when creating a folder and it can't be created.
RF-981 Bug - Statistic Panel not showing Existent/Emitted info on HY-SPH elements
Video preview
RF-1082 Bug - Viewport behind previous window is updating when making a video preview.
XML import/export
RF-2187 Bug - Saving xml backups shows messages "Error trying to get parameter: xxx"
RF-1422 Bug - XML export and import of animated DSpline and Spline Emitter control points is not possible.
RF-1158 Bug - Importing a RealWave via XML on a scene that already has one doesn´t work as expected when overwriting