Image courtesy of Marcin Jastrz?bsk
...
As this primitive is made of straight segments of a cone, the number of Points per Blade define the number of straight cone segments in each blade. You may determine the number of segments you need depending on how it looks from your camera view. The more segments, the smoother the cylindrical blades will look, but you will also increase the demands of RAM usage that is needed to render your scene.
Cylinder primitive using 16 points per blade
...
Several MaxwellGrass modifiers being applied on the same ground geometry (screenshot from Studio)
Two independent grass modifiers applied together to the same ground geometry (hidden here) to create a more natural look by generating a mix of two different grass species
...
Different values for Initial Angle
Grow Towards World-Y NEW IN MAXWELL 3.2
This value allows you to define if you want the blades to grow completely vertical towards the world-Y axis (when set to 100%) like the natural phototropism in plants no matter the ground surface orientation, to grow according the custom Initial Angle defined below ignoring the world-Y direction (when set to 0%) or a combination of those two criteria.
Initial Angle
The initial angle at which the blades will grow. Default is 80 degrees. Values range from 0 to 90 degrees.
...
The Cut Off feature allows you to cut the grass as if it were mowed, producing and abrupt cut.
Different values for Cut Off
Cut Off
The length of the blade (in percentage) at which the blade will be cut. The blade grows as usual until this point, after which it will be cut. A value of 100% will let the blade to grow up to its nominal length (no cut at all), while a value of 0% will cut the blade at its very birth (at zero length).
...
Adjusting the grass display settings to display just 10% of the generated fibers in the viewport (screenshot from Studio)