Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Here, a mesh's shape and quality level are adjusted.

 

 

Linked Domains

It is possible to combine two or more fluid container under a single mesh node. Alternatively you can add additional "Mesher" nodes and mesh each fluid separately.

Add Selected Object(s)

Choose from a list which particle sources you want to mesh.

Remove Object(s)

Remove the selected container(s) from the "Linked Domains" field.

Resolution

This is the mesh's quality level: the better the quality, the more polygons, and the longer the mesh creation time. Choose from five levels. And here is how the polygon size is calculated based on the "Radius" parameter:

  • Low: radius / 1.5001
  • Low-Medium: radius / 2.25
  • Medium: radius / 3.0
  • Medium-High: radius / 4.5
  • High: radius / 6.0
Radius

To create the mesh, RealFlow | Maya creates spheres around the particles and blends them. The size of these spheres is controlled here:

  • The quality of the mesh also depends on the number of particles, and more particles create better meshes.
  • With small "Radius" values and a low number of particles the mesh might look eroded or you will even see individual spheres.
  • With high settings you might lose detail and mesh looks blobby with thick borders.
  • You can refine the mesh with the "Smooth" parameter.
  • The value corresponds with Maya's "Project Scale" und "Project Settings" (Ctrl/Cmd + D) and is updated accordingly when the unit is changed, e.g. from "Centimeters" to "Meters".
Smooth

A value of 4 or 5 is sufficient in most cases. Higher values (6-7) can be used to close small holes in the fluid or remove unwanted patterns. With settings of 8 and many details will be lost.

Thinning

This filter is an easy-to-use method to improve the mesh's overall quality. Valid values range between 0 (no thinning) to 1 (maximum). We recommend settings between 0.1 and 0.3.

Relax

This type stretches and sharpens the mesh’s edges and gives you a much more natural look. Valid values range between 0 (no thinning) to 1 (maximum). We recommend values between 0.1 and 0.3, and alter “Relax Iterations” instead. Over-relaxed meshes have sharp borders and a stringy look.

Relax Iterations

A few notes on this parameter:

  • Valid values range between 0 to 10.
  • Higher values mean less mesh detail.
  • High values in conjunction with high "Relax" settings might produce unrealistic results, unless you really want to achieve a certain effect, e.g. liquid metal.
Auto Mesh Normals

When this option is active

  • the RealFlow | Maya mesh engine will create the normals to create best result in terms of flicker and jitter effects
  • Maya's "Phong" tag will not have any effect on the mesh.

When this option is inactive

  • the mesh's normal quality is usually not so good as with "Auto Mesh Normals" turned on
  • it is possible to use the "Phong" tag's settings to improve the mesh's render quality
  • you can apply the new "Polygon Reduction" tool to the meshes.
Motion Blur Strength

Here it is possible to control the strength of the motion blur effect. The value acts like a multiplier.

Auto Build

When enabled the mesh will be recreated automatically once you have changed a mesh parameter. When disabled you have to click on "Build Mesh".

Build Mesh

A click on this button recreates the mesh with the new settings. If you want to apply changes automatically enable "Auto Build".

  • No labels