Page Comparison

The Host ID of a computer is a chain of alphanumerical characters (it should have no more, no less than 12 characters) that identifies a computer and is needed during the licensing procedure (both on Floating and Node-Locked licenses). It is actually the MAC address of the first ethernet card of the system.

The licensing system normally takes it automatically, but in case any problem occurs and you need to manually find this identifier, here are some methods:

 Windows

• Run the "Command" (cmd.exe) application.

• Enter ipconfig /all (if this does not work, please run cmd.exe as administrator)

• Copy down the "Physical Address" (aka "MAC address") from the first "Ethernet adapter Local Area Connection" (or "... Wireless Connection") section. 

• The hyphens between the two-digit blocks are not necessary.

• All addresses shown here are examples and have to be replaced with your actual address!

MacOS

• Open the "System Preferences" and go to "Network"

• Select the first ethernet device in the list and click on More Options... > Hardware. If your machine doesn’t have an ethernet card, choose the Wi-Fi card.

• Copy down the "MAC-Address" code for the licensing process.

• The colons between the two-digit blocks are not necessary but can be used too.

• All addresses shown here are examples and have to be replaced through with your actual address!

In Maxwell Render (light green icon) the Host ID will show if you go to Help menu > License Info... A window will pop up with your license info and in the first line it will show the host ID

The host ID also appears displayed on the Maxwell Console panel, near the top, on the System Info section, as it is indicated in the screenshot below:

If you only have the RLM server installed in the machine and no other Maxwell software, you can find the Host ID of your machine by looking at the RLM administration web page. You can get to it by typing localhost:5054 in a web browser. If the RLM is running you will see something very similar to the image below. Click on System Info. The Host ID of your machine will be the first twelve characters group after "Ethernet".