Page Comparison

These pages In this page we will show you step by step examples of different materials and general tips on creating and editing Maxwell materials.

 Hide-to-light Workaround

Maxwell materials

What is light?
Visible light is really a very small portion in a range of electromagnetic radiation. This radiation travels in waves of different wavelengths. The difference in wavelengths (the "tops" of each wave) is what makes the difference between blue, red, gamma rays, x-rays, radio waves etc.

"White light" is a combination of all the colors in the visible light spectrum. When we perceive an object as red for example, what really happens is that white light falls on a red surface, and all the wavelengths except those that give red light are absorbed by the material. Only the red portion of the spectrum is reflected back.

Diffuse -- Specular & Reflected light
We see an object because light is reflected from its surface into our eyes. That is, ALL light is reflected light. This may sound confusing at first because it has become common in renderers to refer to reflected light as Specular (or sharply) reflected light.

In the real world light does not have a separate "diffuse" or "specular" part. So what makes a surface look dull, or mirror like? It is the smoothness of that surface.
A surface which is not very smooth has tiny imperfections which scatter the light in all directions, thus creating a very "diffuse" reflection of its environment. So it is the reflection of light from an uneven or granular surface, resulting in an incoming light wave being reflected at a number of angles.

A surface which scatters almost all light in a chaotic, Diffuse way is called a "lambertian" surface, such as the red ball below (F. 01). Lambertian reflectance means that light falling on a surface is scattered in such a way that the apparent brightness of the surface is the same, regardless of the observer's angle of view. Or else: the surface's luminance is the same regardless of angle of view. Many rough surfaces, such as unfinished wood, exhibit Lambertian reflectance.

Many rough surfaces, such as unfinished wood, exhibit Lambertian reflectance

F.01 | F.02

A smooth surface however reflects light uniformly and creates a very sharp or Specular reflection of its environment. Specular reflection is the perfect, mirror-like reflection of light from a surface, in which light from a single incoming direction is reflected into a single outgoing reflection, as for example with a mirror.

It is important to note that because very smooth surfaces reflect light perfectly, they reflect much less of their own color. This is visible in the render (See above F.02), where the ball is still tinted red, but as it is a tinted mirror, its own color shows much less. There are a few exceptions however and one of them is metals. Even if a metal is very smooth, it still reflects its own color much more.
Transparency

An object becomes transparent when light does not stop at the surface, but goes through the object and out the other side. When light passes through a material, it slows down because the material is denser than vacuum. Because of this change in speed, the light is bent, or refracted, when going from vacuum (or air) into the material. This refraction occurs whenever light changes speed, so it happens when it moves from one material to another with different densities. The refraction is also what causes "caustics": concentrated pools of light.

In the render below (F.03), it is refraction that makes the magnifying glass distortion, and creates the caustics pattern. Different materials make light slow down more or less, relative to the speed of light in air or vacuum. This difference between lightspeed in vacuum <--> lightspeed in medium, is specified as the index of refraction (IOR, also called Nd) for that particular medium.

...

 Materials and Stacked Layer System 

Mike Verta