...
With the members of the "Field" class you can not only create these fields, but even perform operations and calculations. When field nodes are connected to elements of the "Display" class it is also possible to show them in RealFlow's viewport.
Nodes
| Name | Description | |
|---|---|---|
| AddMistDensity | This node combines the density value of the mist node at the input position and the input density. | |
| ArrayDistanceFieldConcat | This node concatenates the inputs 'array0' and 'array1' into a single 'out' array. | |
| ArrayDistanceFieldConstant | This node returns a constant array. | |
| ArrayDistanceFieldFilterByMask | This node returns the elements of the input 'array' at positions specified by the 'mask' parameter. | |
| ArrayDistanceFieldFindAllElementIndices | This node returns all positions in the input 'array', which fit to the input 'element' values. | |
| ArrayDistanceFieldFindElement | This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned. | |
| ArrayDistanceFieldInsertElement | This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end. | |
| ArrayDistanceFieldMix | This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used. | |
| ArrayDistanceFieldPushElement | This node appends all the elements from the 'element' at the end of the input 'array'. | |
| ArrayDistanceFieldRemoveElement | This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayDistanceFieldRemoveIndex | This node removes all input array positions by the 'index' input. | |
| ArrayDistanceFieldRemoveRepeatedElements | This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayDistanceFieldResize | This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly. | |
| ArrayDistanceFieldReverse | This node reverses the order of the input 'array'. | |
| ArrayDistanceFieldSlice | This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input. | |
| ArrayRealFieldConcat | This node concatenates the inputs 'array0' and 'array1' into a single 'out' array. | |
| ArrayRealFieldConstant | This node returns a constant array. | |
| ArrayRealFieldFilterByMask | This node returns the elements of the input 'array' at positions specified by the 'mask' parameter. | |
| ArrayRealFieldFindAllElementIndices | This node returns all positions in the input 'array', which fit to the input 'element' values. | |
| ArrayRealFieldFindElement | This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned. | |
| ArrayRealFieldInsertElement | This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end. | |
| ArrayRealFieldMix | This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used. | |
| ArrayRealFieldPushElement | This node appends all the elements from the 'element' at the end of the input 'array'. | |
| ArrayRealFieldRemoveElement | This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayRealFieldRemoveIndex | This node removes all input array positions by the 'index' input. | |
| ArrayRealFieldRemoveRepeatedElements | This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayRealFieldResize | This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly. | |
| ArrayRealFieldReverse | This node reverses the order of the input 'array'. | |
| ArrayRealFieldSlice | This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input. | |
| ArrayVector3FieldConcat | This node concatenates the inputs 'array0' and 'array1' into a single 'out' array. | |
| ArrayVector3FieldConstant | This node returns a constant array. | |
| ArrayVector3FieldFilterByMask | This node returns the elements of the input 'array' at positions specified by the 'mask' parameter. | |
| ArrayVector3FieldFindAllElementIndices | This node returns all positions in the input 'array', which fit to the input 'element' values. | |
| ArrayVector3FieldFindElement | This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned. | |
| ArrayVector3FieldInsertElement | This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end. | |
| ArrayVector3FieldMix | This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used. | |
| ArrayVector3FieldPushElement | This node appends all the elements from the 'element' at the end of the input 'array'. | |
| ArrayVector3FieldRemoveElement | This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayVector3FieldRemoveIndex | This node removes all input array positions by the 'index' input. | |
| ArrayVector3FieldRemoveRepeatedElements | This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions. | |
| ArrayVector3FieldResize | This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly. | |
| ArrayVector3FieldReverse | This node reverses the order of the input 'array'. | |
| ArrayVector3FieldSlice | This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input. | |
| DistanceFieldCopy | This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore. | |
| FieldCurvatureSample | Returns the curvature of the input 'field' at the specified 'position'. | |
| FieldDistanceCreateFromMesh | Creates a distance field from the input mesh specified by 'inMesh'. | |
| FieldDistanceCreateFromPoints | Creates a distance field from the provided input 'positions', specified by the input parameters. | |
| FieldDistanceIntersection | Performs an intersection operation between two distance fields. The intersection operation is max(d0,d1). | |
| FieldDistanceInvert | Performs an invert operation on the distance field. | |
| FieldDistanceSubstraction | Performs a substraction operation between two distance fields. The substraction operation is max(-d0,d1). | |
| FieldDistanceUnion | Performs a union operation between two distance fields. The union operation is min(d0,d1). | |
| FieldDivergenceCreate | Computes the divergence field of the input 'vector field'. | |
| FieldFindMinMax | Computes the minimum and maximum values of the input field. | |
| FieldForceAdd | This node adds a force field to the node. | |
| FieldGradientCreate | Computes the gradient field of the input 'distance field'. | |
| FieldMaskCreateFromDistanceField | Creates a mask field from a distance field. The volume inside the distance field will be filled with 1 values and the volume outside with 0 values. You can change this behaviour by setting the 'reverse' input to 'yes'. | |
| FieldMix | Creates a field that takes values from the 'field0' in those cells where the mask field has a value of 1 and takes values from the 'field1' where the mask field has a value of 0. The dimensions of the new field are the same than the mask field. The 'background' value is used when the sample is out of the input fields bounds. | |
| FieldNegate | Negates the values of the input fields. i.e. their values are multiplied by -1. | |
| FieldNormalizedCreate | Computes the normalized field of the input 'vector field'. | |
| FieldRealCreate | Creates a real field. | |
| FieldRealCreateConstant | Creates a real field with a constant value. | FieldRealMesher|
| Computes a mesh for the input field at the specified isovalue. | FieldRealSweep | Sweeps a real field throught a distance field. |
| FieldSample | Returns the value of the input field at the specified position. If the position is out of the field box the default value is given. | |
| FieldScalarMesher | Computes a mesh for the input field at the specified isovalue. | |
| FieldVector3Create | Creates a vector field. | |
| FieldVector3CreateConstant | Creates a vector field with a constant value. | |
| FieldVector3Sweep | Sweeps a vector field throught a distance field. | |
| FieldVelocitySet | This node sets a velocity field for the input node. | |
| FieldViscositySet | This node sets a viscosity field for the input node. | |
| GetArrayDistanceFieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| GetArrayRealFieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| GetArrayVector3FieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| GetDistanceField | This node gets a distance field from the input node. | |
| GetDistanceFieldGlobalVariable | This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes). | |
| GetFieldBoundingBox | Returns the bounding box of the specified input field. | |
| GetFieldInfo | Returns information about the input field. | |
| GetRealField | This node gets a field of type Real from the input node. | |
| GetRealFieldGlobalVariable | This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes). | |
| GetVector3Field | This node gets a field of type Vector3 from the input node. | |
| GetVector3FieldGlobalVariable | This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes). | |
| RealFieldCopy | This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore. | |
| SetArrayDistanceFieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| SetArrayRealFieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| SetArrayVector3FieldElement | This node returns the elements of the input 'array' at positions specified by the 'index' parameter. | |
| SetDistanceFieldGlobalVariable | This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes. | |
| SetMistDensity | This node sets the density value of the mist node at the input position. | |
| SetRealField | This node replaces the values of a field of type Real from the input node. | |
| SetRealFieldGlobalVariable | This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes. | |
| SetVector3FieldGlobalVariable | This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes. | |
| Vector3FieldCopy | This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore. |
anchor ArrayDistanceFieldConcat
AddMistDensity
...
ArrayDistanceFieldConcat
This node concatenates the inputs 'array0' and 'combines the density value of the mist node at the input position and the input density.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| node | RealFlow Node | through | The node |
| position | Vector3 | The position of the mist node field where the density will be added | |
| density | Real | The density value to add |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | node | The input 'node' |
ArrayDistanceFieldConcat
This node concatenates the inputs 'array0' and 'array1' into a single 'out' array.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | DistanceField |
| The array0 | |||||
| array1 | DistanceField |
| The array1 |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldConstant
ArrayDistanceFieldConstant
This node returns a constant array.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| constant | DistanceField | The constant | |
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out array | DistanceField | The out array |
Anchor
ArrayDistanceFieldFilterByMask
This node returns the elements of the input 'array' at positions specified by the 'mask' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | DistanceField |
| The result |
Anchor
ArrayDistanceFieldFindAllElementIndices
ArrayDistanceFieldFindAllElementIndices
This node returns all positions in the input 'array', which fit to the input 'element' values. .
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | DistanceField | The array | |
| element | DistanceField | The value to find in the input array |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index | |
| mask | Bit | The mask |
Anchor
ArrayDistanceFieldFindElement
...
This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | DistanceField | The array | |
| element | DistanceField | The value to find in the input array | |
| start index | Integer | The first index to search the element from |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index |
Anchor
ArrayDistanceFieldInsertElement
This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| element | DistanceField | The value to insert | ||||||
| index | Integer (1) | The position to insert the input element on |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldMix
This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used.
The size of the output is the same as mask's size.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | DistanceField |
| The array0 | |||||
| array1 | DistanceField |
| The array1 | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
anchor
ArrayDistanceFieldPushElement
...
ArrayDistanceFieldPushElement
This node appends all the elements from the 'element' at the end of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| element | DistanceField | The value to append at the end |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldRemoveElement
This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| element | DistanceField | The value to remove all its instances from the input array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array | |||||
| mask | Bit | The mask |
Anchor
ArrayDistanceFieldRemoveIndex
ArrayDistanceFieldRemoveIndex
This node removes all input array positions by the 'index' input. .
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| index | Integer | The positions of the input array to remove |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldRemoveRepeatedElements
ArrayDistanceFieldRemoveRepeatedElements
This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| new to old | Integer | The new to old | ||||||
| mask | Bit | The mask | ||||||
| out array | DistanceField |
| The out array |
anchor
ArrayDistanceFieldResize
...
ArrayDistanceFieldResize
This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldReverse
This node reverses the order of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayDistanceFieldSlice
This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| first | Integer (1) | The position of the element that will be the first of the output array | ||||||
| size | Integer (1) | The total number of elements to copy from the input array. If value is negative, all the elements from 'first' are copied to the output array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | DistanceField |
| The out array |
Anchor
ArrayRealFieldConcat
This node concatenates the inputs 'array0' and 'array1' into a single 'out' array.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | RealField |
| The array0 | |||||
| array1 | RealField |
| The array1 |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayRealFieldConstant
This node returns a constant array.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| constant | RealField | The constant | |
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out array | RealField | The out array |
anchor
ArrayRealFieldFilterByMask
...
ArrayRealFieldFilterByMask
This node returns the elements of the input 'array' at positions specified by the 'mask' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | RealField |
| The result |
Anchor
ArrayRealFieldFindAllElementIndices
ArrayRealFieldFindAllElementIndices
This node returns all positions in the input 'array', which fit to the input 'element' values. .
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | RealField | The array | |
| element | RealField | The value to find in the input array |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index | |
| mask | Bit | The mask |
Anchor
ArrayRealFieldFindElement
ArrayRealFieldFindElement
This node is executed in parallel according to its input pins size.
This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | RealField | The array | |
| element | RealField | The value to find in the input array | |
| start index | Integer | The first index to search the element from |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index |
anchor
ArrayRealFieldInsertElement
...
ArrayRealFieldInsertElement
This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| element | RealField | The value to insert | ||||||
| index | Integer (1) | The position to insert the input element on |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
anchor
ArrayRealFieldMix
...
ArrayRealFieldMix
This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used.
The size of the output is the same as mask's size.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | RealField |
| The array0 | |||||
| array1 | RealField |
| The array1 | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
anchor
ArrayRealFieldPushElement
...
ArrayRealFieldPushElement
This This node appends all the elements from the 'element' at the end of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| element | RealField | The value to append at the end |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayRealFieldRemoveElement
This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| element | RealField | The value to remove all its instances from the input array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array | |||||
| mask | Bit | The mask |
Anchor
ArrayRealFieldRemoveIndex
This node removes all input array positions by the 'index' input. .
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| index | Integer | The positions of the input array to remove |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayRealFieldRemoveRepeatedElements
This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| new to old | Integer | The new to old | ||||||
| mask | Bit | The mask | ||||||
| out array | RealField |
| The out array |
anchor
ArrayRealFieldResize
...
ArrayRealFieldResize
This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayRealFieldReverse
This node reverses the order of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayRealFieldSlice
ArrayRealFieldSlice
This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| first | Integer (1) | The position of the element that will be the first of the output array | ||||||
| size | Integer (1) | The total number of elements to copy from the input array. If value is negative, all the elements from 'first' are copied to the output array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | RealField |
| The out array |
Anchor
ArrayVector3FieldConcat
ArrayVector3FieldConcat
This node concatenates the inputs 'array0' and 'array1' into a single 'out' array.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | Vector3Field |
| The array0 | |||||
| array1 | Vector3Field |
| The array1 |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
anchor
ArrayVector3FieldConstant
...
ArrayVector3FieldConstant
This node returns a constant array.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| constant | Vector3Field | The constant | |
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out array | Vector3Field | The out array |
Anchor
ArrayVector3FieldFilterByMask
This node returns the elements of the input 'array' at positions specified by the 'mask' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | Vector3Field |
| The result |
Anchor
ArrayVector3FieldFindAllElementIndices
This node returns all positions in the input 'array', which fit to the input 'element' values. .
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | Vector3Field | The array | |
| element | Vector3Field | The value to find in the input array |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index | |
| mask | Bit | The mask |
Anchor
ArrayVector3FieldFindElement
...
This node returns the first position of appearance of the input 'element' within the input 'array'. If the array does not contain the element, -1 is returned.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | Vector3Field | The array | |
| element | Vector3Field | The value to find in the input array | |
| start index | Integer | The first index to search the element from |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| index | Integer | The index |
Anchor
ArrayVector3FieldInsertElement
This node inserts all elements from the 'element' input into the input 'array' at the position specified by 'position'. If 'position' is equal or lower than 0 then the elements are inserted at the beginning of the array. If 'position' is greater or equal than the inputs 'array' size, elements are appended at the end.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| element | Vector3Field | The value to insert | ||||||
| index | Integer (1) | The position to insert the input element on |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
anchor
ArrayVector3FieldMix
...
ArrayVector3FieldMix
This node creates an output array based on the two inputs 'array0' and 'array1' and the input mask. If the mask value equals 0 then the value of 'array0' is used, if the mask value is 1 the value of 'array1' is used.
The size of the output is the same as mask's size.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array0 | Vector3Field |
| The array0 | |||||
| array1 | Vector3Field |
| The array1 | |||||
| mask | Bit | The mask |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
Anchor
ArrayVector3FieldPushElement
ArrayVector3FieldPushElement
This node appends all the elements from the 'element' at the end of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| element | Vector3Field | The value to append at the end |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
Anchor
ArrayVector3FieldRemoveElement
ArrayVector3FieldRemoveElement
This node removes all elements of the 'by_value' from the input 'array'. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| element | Vector3Field | The value to remove all its instances from the input array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array | |||||
| mask | Bit | The mask |
anchor
ArrayVector3FieldRemoveIndex
...
ArrayVector3FieldRemoveIndex
This node removes all input array positions by the 'index' input. .
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| index | Integer | The positions of the input array to remove |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
anchor
ArrayVector3FieldRemoveRepeatedElements
...
ArrayVector3FieldRemoveRepeatedElements
This node removes all repetitions of elements from the input 'array'. The 'new_to_old' array can be used as an 'index' input for a GetArrayElement-Node to restore the original array. The returned mask has the same size as the input 'array' and is set to 0 at removed positions.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| new to old | Integer | The new to old | ||||||
| mask | Bit | The mask | ||||||
| out array | Vector3Field |
| The out array |
anchor
ArrayVector3FieldResize
...
ArrayVector3FieldResize
This This node resizes the input 'array'. If the result is bigger than the input array, the last value is repeated accordingly.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| size | Integer (1) | The size |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
Anchor
ArrayVector3FieldReverse
This node reverses the order of the input 'array'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
Anchor
ArrayVector3FieldSlice
This node returns an array containing the range of the input 'array' from the 'first' position with the given input 'size'.Thus, the output array is a subarray or slice of the input.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| first | Integer (1) | The position of the element that will be the first of the output array | ||||||
| size | Integer (1) | The total number of elements to copy from the input array. If value is negative, all the elements from 'first' are copied to the output array |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| out array | Vector3Field |
| The out array |
Anchor
DistanceFieldCopy
This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| in | DistanceField | The value to duplicate |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| copy | DistanceField | A copy of the input |
anchor
FieldCurvatureSample
...
FieldCurvatureSample
Returns the curvature of the input 'field' at the specified 'position'.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| The field | ||||||
| position | Vector3 | The position |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| sample | Real | The sample |
Anchor
FieldDistanceCreateFromMesh
...
Creates a distance field from the input mesh specified by 'inMesh'.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| mesh | Mesh | The input mesh | |
| cell size | Real | The cell size | |
| extension | Real | The size the distance field is extended related to the mesh bounding box |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field | DistanceField | The distance field |
Anchor
FieldDistanceCreateFromPoints
FieldDistanceCreateFromPoints
The algorithm to perform the operation of this node is multithreaded.
Creates a distance field from the provided input 'positions', specified by the input parameters.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| positions | Vector3 | The positions | |
| radii | Real | The radii | |
| weights | Real | The weights | |
| cell size | Real (1) | The cell size | |
| smooth | Real (1) | The smooth | |
| clipping box | Box (1) | The bounds of the computed distance field. If nothing is connected, the distance field is extended to the bounding box of the input points |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field | DistanceField | The distance field |
Anchor
FieldDistanceIntersection
FieldDistanceIntersection
Performs an intersection operation between two distance fields. The intersection operation is max(d0,d1).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field0 | DistanceField (1) | The distance field0 | |
| distance field1 | DistanceField (1) | The distance field1 |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
anchor
FieldDistanceInvert
...
FieldDistanceInvert
Performs an invert operation on the distance field.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field | DistanceField | The distance field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out distance field | DistanceField | The out distance field |
Anchor
FieldDistanceSubstraction
Performs a substraction operation between two distance fields. The substraction operation is max(-d0,d1).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field0 | DistanceField (1) | The distance field0 | |
| distance field1 | DistanceField (1) | The distance field1 |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
Anchor
FieldDistanceUnion
Performs a union operation between two distance fields. The union operation is min(d0,d1).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field0 | DistanceField (1) | The distance field0 | |
| distance field1 | DistanceField (1) | The distance field1 |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
Anchor
FieldDivergenceCreate
Computes the divergence field of the input 'vector field'.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| vector field | Vector3Field | The vector field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| divergence field | RealField | The divergence field |
Anchor
FieldFindMinMax
Computes the minimum and maximum values of the input field.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| The field |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| min |
| The min | ||||||
| max |
| The max |
anchor
FieldForceAdd
...
FieldForceAdd
This node adds a force field to the node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| node | RealFlow Node | out node | The node |
| field | Vector3Field (1) | The field | |
| scale | Real (1) | The scale |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out node | PassThrough | node | The out node |
Anchor
FieldGradientCreate
FieldGradientCreate
Computes the gradient field of the input 'distance field'.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field | DistanceField | The distance field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| gradient field | Vector3Field | The gradient field |
Anchor
FieldMaskCreateFromDistanceField
FieldMaskCreateFromDistanceField
Creates a mask field from a distance field. The volume inside the distance field will be filled with 1 values and the volume outside with 0 values. You can change this behaviour by setting the 'reverse' input to 'yes'.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| distance field | DistanceField | The distance field | |
| reverse | Bit | Whether the volume inside of the distance field is filled with 1 or 0 values. The default value will fill the volume inside with 1 values |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | MaskField | The field |
anchor
FieldMix
...
FieldMix
Creates a field that takes values from the 'field0' in those cells where the mask field has a value of 1 and takes values from the 'field1' where the mask field has a value of 0. The dimensions of the new field are the same than the mask field. The 'background' value is used when the sample is out of the input fields bounds.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field0 |
| The field0 | ||||||
| field1 |
| The field1 | ||||||
| mask field | MaskField (1) | The mask field | ||||||
| background |
| The value used when the sample is out of the input fields bounds |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| The field |
anchor
FieldNegate
...
FieldNegate
The algorithm to perform the operation of this node is multithreaded.
Negates the values of the input fields. i.e. their values are multiplied by -1.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| out field | The field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out field | PassThrough | field | The out field |
anchor
FieldNormalizedCreate
...
FieldNormalizedCreate
Computes Computes the normalized field of the input 'vector field'.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| vector field | Vector3Field | The vector field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| normalized field | Vector3Field | The normalized field |
Anchor
FieldRealCreate
Creates a real field.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| positions | Vector3 | The positions | |
| values | Real | The values | |
| cell size | Real (1) | The cell size | |
| extension | Real (1) | The extension | |
| background | Real (1) | The background |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
Anchor
FieldRealCreateConstant
Creates a real field with a constant value.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| box | Box | The box | |
| constant | Real | The constant | |
| cell size | Real | The cell size |
Outputs
...
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
...
FieldRealMesher
The algorithm to perform the operation of this node is multithreaded.
Computes a mesh for the input field at the specified isovalue.
...
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | |||
| Expand | |||
| RealField | The field isovalue | Real |
...
The isovalue
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| mesh | Mesh | The mesh |
...
FieldRealSweep
FieldRealSweep
The algorithm to perform the operation of this node is multithreaded.
...
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out real field | RealField | The out real field |
Anchor
FieldSample
FieldSample
This node is executed in parallel according to its input pins size.
...
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| sample |
| The sample |
...
FieldScalarMesher
The algorithm to perform the operation of this node is multithreaded.
Computes a mesh for the input field at the specified isovalue.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| The field | ||||||
| isovalue | Real | The isovalue |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| mesh | Mesh | The mesh |
FieldVector3Create
Creates a vector field.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| positions | Vector3 | The positions | |
| vectors | Vector3 | The vectors | |
| cell size | Real | The cell size | |
| extension | Real | The extension |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | Vector3Field | The field |
anchor
FieldVector3CreateConstant
...
FieldVector3CreateConstant
Creates a vector field with a constant value.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| box | Box | The box | |
| constant | Vector3 | The constant | |
| cell size | Real | The cell size |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | Vector3Field | The field |
anchor
FieldVector3Sweep
...
FieldVector3Sweep
The algorithm to perform the operation of this node is multithreaded.
Sweeps a vector field throught a distance field.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| vector field | Vector3Field (1) | The vector field | |
| distance field | DistanceField (1) | The distance field | |
| sweep outside | Bit (1) | True to sweep along the positive values of the distance field. False to sweep along the negative values of the input distance field | |
| bandwidth | Real (1) | The bandwidth |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out vector field | Vector3Field | The out vector field |
anchor
FieldVelocitySet
...
FieldVelocitySet
This node This node sets a velocity field for the input node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| node | RealFlow Node | out node | The node |
| field | Vector3Field (1) | The field | |
| scale | Real (1) | The scale |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out node | PassThrough | node | The out node |
Anchor
FieldViscositySet
This node sets a viscosity field for the input node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| node | RealFlow Node | out node | The node |
| field | RealField (1) | The field | |
| scale | Real (1) | The scale |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out node | PassThrough | node | The out node |
Anchor
GetArrayDistanceFieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | DistanceField | The array | |
| index | Integer | The index |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| element | DistanceField | The element |
Anchor
GetArrayRealFieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | RealField | The array | |
| index | Integer | The index |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| element | RealField | The element |
anchor
GetArrayVector3FieldElement
...
GetArrayVector3FieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| array | Vector3Field | The array | |
| index | Integer | The index |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| element | Vector3Field | The element |
Anchor
GetDistanceField
This node gets a distance field from the input node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String | The name of the field, valid names are: " For Hybrido Domain nodes: "fluid_phi": the fluid distance field. "solid_phi": the solid distance field. | |
| node | RealFlow Node | The node |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | DistanceField | The field |
...
GetDistanceFieldGlobalVariable
...
" For Object nodes: "solid_phi": the solid distance field. " For MultiBody nodes. If MultiBody node contains more than one object and input sizes are more than one, only the first object of the MultiBody will be returned. "solid_phi": the solid distance field.
| |||
| node | RealFlow Node | The node |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | DistanceField | The field |
GetDistanceFieldGlobalVariable
This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out | DistanceField | The out |
Anchor
GetFieldBoundingBox
GetFieldBoundingBox
Returns the bounding box of the specified input field.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| The field |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| box | Box | The box |
anchor
GetFieldInfo
...
GetFieldInfo
Returns information about the input field.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| field |
| through | The field |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| bounding box | Box | The field bounding box | ||||||
| cell size | Real | The field cell size | ||||||
| cell count x | Integer | The number of cells across the X component of the field | ||||||
| cell count y | Integer | The number of cells across the Y component of the field | ||||||
| cell count z | Integer | The number of cells across the Z component of the field | ||||||
| min |
| The field minimum value | ||||||
| max |
| The field maximum value | ||||||
| is vector3 field | Bit | Returns true if the input field is of Vector3Field type | ||||||
| is real field | Bit | Returns true if the input field is of RealField type | ||||||
| is distance field | Bit | Returns true if the input field is of DistanceField type | ||||||
| through | PassThrough | field | The input 'field' |
Anchor
GetRealField
This node gets a field of type Real from the input node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String | The name of the field, valid names are: " For Hybrido Domain nodes: "fluid_phi": the fluid distance field (use the "GetDistanceField" node if you want to load this field as a distance field). "solid_phi": the fluid distance field (use the "GetDistanceField" node if you want to load this field as a distance field). "fluid_velocity_u": the u component of the fluid velocity field. "fluid_velocity_v": the v component of the fluid velocity field. "fluid_velocity_w": the w component of the fluid velocity field. "solid_velocity_u": the u component of the solid velocity field. "solid_velocity_v": the v component of the solid velocity field. "solid_velocity_w": the w component of the solid velocity field. "fluid_acceleration_u": the u component of the fluid acceleration field. "fluid_acceleration_v": the v component of the fluid acceleration field. "fluid_acceleration_w": the w component of the fluid acceleration field. "friction": the friction field. "viscosity": the viscosity field. "friction_bandwith": the friction bandwith field. " For Hybrido Mist nodes: "density_phi": the density field.
| |
| node | RealFlow Node | The node |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | RealField | The field |
Anchor
GetRealFieldGlobalVariable
GetRealFieldGlobalVariable
This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out | RealField | The out |
Anchor
GetVector3Field
GetVector3Field
This node gets a field of type Vector3 from the input node.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String | The name of the field, valid names are: "fluid_velocity": the fluid velocity field. "fluid_acceleration": the fluid acceleration field. "solid_velocity": the solid velocity field.
| |
| node | RealFlow Node | The node |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| field | Vector3Field | The field |
anchor
GetVector3FieldGlobalVariable
...
GetVector3FieldGlobalVariable
This node returns a reference to previously stored variables in global memory (using the SetGlobalVariable-Nodes).
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| out | Vector3Field | The out |
Anchor
RealFieldCopy
This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| in | RealField | The value to duplicate |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| copy | RealField | A copy of the input |
Anchor
SetArrayDistanceFieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | DistanceField |
| The array | |||||
| index | Integer | The index | ||||||
| element | DistanceField | The element |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | DistanceField |
| The result |
Anchor
SetArrayRealFieldElement
SetArrayRealFieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | RealField |
| The array | |||||
| index | Integer | The index | ||||||
| element | RealField | The element |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | RealField |
| The result |
Anchor
SetArrayVector3FieldElement
SetArrayVector3FieldElement
This node returns the elements of the input 'array' at positions specified by the 'index' parameter.
Inputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| array | Vector3Field |
| The array | |||||
| index | Integer | The index | ||||||
| element | Vector3Field | The element |
Outputs
| Name | Types | PassThrough | Description | |||||
|---|---|---|---|---|---|---|---|---|
| result | Vector3Field |
| The result |
Anchor
SetDistanceFieldGlobalVariable
This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name | |
| in | DistanceField | through | The in |
| store copy | Bit (1) | The store copy |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | in | The value connected to the input |
| out copy | DistanceField | The value copied in memory in case a copy has been performed. The same input value otherwise |
SetMistDensity
This node sets the density value of the mist node at the input position.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| node | RealFlow Node | through | The node |
| position | Vector3 | The position of the mist node field which density will be replaced | |
| density | Real | The new density value |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | node | The input 'node' |
SetRealField
This node replaces the values of a field of type Real from the input node
sampling the input field.
.
Inputs
| Name | Types | PassThrough | Description | ||
|---|---|---|---|---|---|
| name | String (1)String | The name | in | DistanceFieldof the field, valid names are: " For Hybrido Mist nodes: "density_phi": the density field.
| |
| node | RealFlow Node | through | The innode | store copy | |
| field | RealField | The store copyinput field to be sampled |
Outputs
...
SetRealFieldGlobalVariable
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | innode | The value connected to the input |
| out copy | DistanceField | The value copied in memory in case a copy has been performed. The same input value otherwise |
...
input 'node' |
SetRealFieldGlobalVariable
This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name | |
| in | RealField | through | The in |
| store copy | Bit (1) | The store copy |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | in | The value connected to the input |
| out copy | RealField | The value copied in memory in case a copy has been performed. The same input value otherwise |
anchor
SetVector3FieldGlobalVariable
...
SetVector3FieldGlobalVariable
This node allows the user to create a reference or a copy of the input pin in global memory to be used within other RealFlow graph through the GetGlobalVariable nodes.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| name | String (1) | The name | |
| in | Vector3Field | through | The in |
| store copy | Bit (1) | The store copy |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| through | PassThrough | in | The value connected to the input |
| out copy | Vector3Field | The value copied in memory in case a copy has been performed. The same input value otherwise |
Anchor
Vector3FieldCopy
This node duplicates the input value to the output. If you remove this node the output copy will not exist in the graph anymore.
Inputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| in | Vector3Field | The value to duplicate |
Outputs
| Name | Types | PassThrough | Description |
|---|---|---|---|
| copy | Vector3Field | A copy of the input |