The Output panel provides settings which control the various non-physical aspects of how the image will be rendered in Maxwell.
File Output (RS)
These parameters, which only appear in the Render Suite plugin, control where output MXS and image files are written.
...
The Export sub-panel contains parameters pertaining to the plugin's behavior during MXS export. Its content depends upon the running plugin version.
| Parameter |
SA |
RS | Function |
|---|---|---|---|
| Pack & Go |  |  | When this option is enabled, the plugin will copy all files referenced by the output MXS into a textures directory, located in the output folder. Additionally, all file paths contained in the MXS file will be transformed into relative paths, in order that an MXS file may more easily be moved from machine to machine. |
| Use Instances | | | When this option is enabled, the plugin will attempt to replace any possible Components and Groups with Maxwell Instances in the output. This can result in drastically reduced memory requirements, as well as greatly improved export performance. This option is always enabled in the Standalone plugin, since there exists no reason to disable it. |
| Face Materials | | |
Where SketchUp supports different front and back materials for faces, Maxwell does not. Therefore, as the model is being exported, the plugin first attempts to find a face's front material and to then build a Maxwell material for the face using this SketchUp material. If the face has no front material, the plugin will check to see if it has a back material, and if it does, then that material will be used. Setting this option to Use Front Only will cause the plugin to disregard back materials entirely. |
| Hidden Layers | | | By default, the plugin will not render geometry located on layers which are hidden in SketchUp. Setting Hidden Layers to Render disables this check, such that all geometry contained in the scene will be exported, regardless of the visibility state of its layer. This can be useful in cases where high-resolution geometry has been placed on a hidden layer for the express purpose of keeping SketchUp more responsive. |
| Auto MXM | | | When this option is enabled, the plugin will attempt to match SketchUp material names with the names of MXM files found in any of the Search Paths specified in the Options panel (standard Maxwell installation directories will also be searched). When a match is found, the MXM file will be used in the MXS. |
| Proxies | | | When this option is enabled, the plugin will attempt to replace Component Definitions with the suffix _proxy in their name with definitions whose names match, but without the _proxy suffix. This allows for export-time replacement of low-poly geometry with hidden high-poly geometry For example, assume that a Component is shown in the viewport, and the Definition for this Component is named 'airplane_proxy'. During export, the plugin will search for a different Definition in the document named 'airplane'. If such a definition is found, then any occurrence of 'airplane_proxy' will be replaced with the geometry contained in the 'airplane' Definition during export. |
Engine (RS)
The Engine sub-panel contains settings which control various aspects of Maxwell Render itself, and therefore does not appear in the Standalone plugin (SA).
| Parameter | Function |
|---|---|
| Stop Time | This value controls the amount of time, in minutes, that Maxwell Render will continue calculating the output image. Generally, for single frames, this should be left at a very high value, with Maxwell being stopped manually only when the image has reached the desired level of quality. |
| Sampling Level | This value controls the Sampling Level at which Maxwell Render will stop the calculation. Generally, this should be left at a high value to prevent Maxwell stopping before the image is finished. For unattended batch rendering, however, it is useful to set this to the lowest acceptable value for the scene in question. This will provide a time-independent method for rendering multiple frames to a common quality level. |
| Threads | This value controls the number of Threads that Maxwell Render will use. While named Threads, this usually means how many CPU cores will be used by Maxwell Render. When Threads is set to 0, Maxwell will auto-detect and leverage all available resources. |
| Multilight | This drop-down controls whether Maxwell's Multilight feature will be enabled during rendering. There are two Multilight modes available: Intensity and Color + Intensity. Note that the use of Multilight will greatly increase the memory required to render the scene, since separate output buffers must be maintained for each emitter contained in the scene. The Color + Intensity option multiplies this requirement even further. |
| Command Line | Anything entered here will be added to the command-line used to start Maxwell Render. By default, it contains the -d flag, which causes Maxwell Render to start in GUI mode, and the -p:low flag, which causes it to run in low-priority mode. There are many other command-line flags available, and you can get the current list by opening a command prompt, navigating to the Maxwell directory, and typing maxwell /?. |
...
The Materials sub-panel is used to specify Override and Default MXM files. If an Override MXM is specified, it will be used instead of any materials otherwise defined in the scene, with the exception of emitters. This is useful for running quick light studies. If a Default MXM is specified, it will be used in place of the standard light-grey diffuse default material (i.e. the material used for objects which have no explicit material).
Channels (RS)
The Channels sub-panel is used to enable, disable, and configure various Channels in Maxwell Render, and therefore does not appear in the Standalone plugin (SA). When the Render channel is activated, it is possible to render one of the following: Diffuse, Reflections, or Diffuse + Reflections. Additional channels may be enabled or disabled as desired; for each one that is enabled, an additional corresponding image will be generated at the output location. ZBuffer Min. and ZBuffer Max. may be set interactively using the Set DOF, Z-Clip, or Z-Buffer Tool; to do so, press CTRL /Option(Win/OSX) while selecting points with the tool.
...
This sub-panel is used to enable, disable, and configure the various Simulens effects which are available in Maxwell Render.
Render Layers (RS)
This sub-panel, which appears only in the Render Suite plugin, is used to control whether the Illumination, Reflection, and Refraction layers will be rendered.
...