...
To place a Reference, select the Maxwell Reference tool at the bottom of the Tools palette. (If the Maxwell tools are missing, select Workspace > Reset Workspace from the main menu.)
Tool Options
- Open: Select MXS.
- Delete: Delete MXS filepath.
- Display
- Bounding Box: for maximum viewport performance and minimum storage requirements
- Points: Use when alignment or distribution is critical. It is possible to switch between Points and Bounding Box display after creation
- Scale
- No Scale: Scale will be the same as that of the original MXS (1,1,1)
- Dynamic: Interactively scale Reference after establishing the base point with the first mouse click
- Preset: Use preset scale indicated by x,y,z fields
- Random Uniform: Each mouse click will place a different, uniformly scaled Reference within the range specified by the pair of fields
- Random Non-Uniform: Each mouse click will place a different, non-uniformly scaled Reference within the range specified by the pairs of x,y,z fields
- Rotate
- No Rotation: Rotation will be the same as that of the original MXS (0,0,0)
- Dynamic: Interactively rotate the Reference after establishing the base point with the first mouse click
- Orientation: XY, YZ, ZX, or Surface Normal. Controls the base plane for the rotation. Also used for the latter two options, below.
- Preset: Use preset rotation indicated by azimuth and altitude fields
- Random: Each mouse click with place a different, rotated Reference in the range specified by the pairs of azimuth,altitude fields
...