...
Using a particle cloud to distribute instances of a few bird models using the MaxwellCloner. They can use the motion blur from the particle simulation
Parameters
MaxwellCloner panel in Studio
...
- File Name: Path to the .BIN particle file
- Radius Factor: Multiplier for the original radius value of each particle.
- MB Factor: Multiplier for the particles motion blur value.
- Shutter 1/s: Shutter speed indicated in the fluid simulation.
- Load particles (%): Percentage of the particles to be rendered.
- Start offset: When you use the Load particles parameter lo load a fraction of the original particles, you can specify the initial particle number in which your particle sample will start from, using this parameter.
- Create N particles per particles: also known as Multiparticles. You can generate more particles from the original ones included in the .BIN file. This way, a lighter simulation with an small amount of particles can produce a more dense cloud by multiplying them on render time. The new particles are affected by the speed of the original ones.
- Extra particles dispersion: Distribute the new generated particles with this dispersion value around the original particle.
- Extra particles deformation: The new particles can be evenly generated inside an sphere around the original one, or inside an ellipsoid with this value of eccentricity. The ellipsoid is aligned along the direction of the particle speed.
- Use velocity: Apply the particle velocity to the instanced object.
- Scale with particle radius: .
- Delete MaxwellCloner: Delete the instancing modifier.
Test the scene
You can download the .BIN particle file here to perform your own tests (Particle_Test_01.bin).