With the “Hybrido Mesh” engine it is possible to “bake” the core fluid's displacement to the final mesh and there are several parameters to control the final look. With these settings you separate the displacement from the splashes. If your core fluid simulation has been simulated without displacement, this parameter set can be ignored. Please bear in mind that this option is very RAM-intensive and creates very large meshes – several million polygons per frames are absolutely normal. The parameters of the "Displacement" panel support the "Interactive Meshing" feature.
Auto edge length
This option uses the Hybrido Domain's “Quality” parameter from the “Displacement” channel to control the resolution at the mesh's edges. An example: With a “Quality” value of 512, the mesh's edges are subdivided until there are 512 triangles at each side. For this process, the domain's projection plane is used. When set to “No” the “@ edge length” parameter is unlocked where you can define the edge length manually.
...