...
With grid fluid domains you can select from four different modes to determine how the domain’s box should be displayed:
None | The box representation of the domain is hidden. |
|---|---|
Box | This is the default setting. With this mode you can see the domain around the fluid. |
Cells | All the cells of the domain are shown. With particles this mode can be a little confusing due to the large number of cells. |
Back cells | The grid elements are projected on the domain’s walls like a 2D raster. |
...
This mode is used to show different physical characteristics of the fluid. With Hybrido domains you can choose from a wide variety of attributes.
| Info |
|---|
| If you want to use “Splash/Foam emission”, please also read the chapter “Splash Preview Workflow” directly below. |
Velocity | Shows the velocity for all three directions in space X, Y and Z. |
|---|---|
Velocity.[a] | Displays only the X, Y or Z part (= [a]) of the current velocity. |
Vorticity | To visualize the particles' spin, activate this mode. |
Normal | Each particle carries a normal vector that can be made visible with this option. |
Constant | Used to apply one colour for all particles without shades or gradients. |
Splash/Foam emission | With this powerful mode it is possible to preview the areas where splash and foam particles will be emitted. These areas, where splashes will be created, are displayed in white, while the non-emitting particles are dyed with the colour from “Min range color”. This option unlocks a couple of additional parameters. *) |
...